Last weekend marked the close of CanJam Dallas 2026. TOPPING traveled overseas with a strong lineup of our core products and brought them to the North American stage. The demo room stayed busy throughout the event, drawing a steady stream of audio enthusiasts eager to listen, compare, and talk about gears.

Audiophiles from Dallas and across the United States filled our booth. They spent time with the full TOPPING Hi-Fi lineup, swapping ideas on system matching, tuning, and what they actually heard. Visitors spoke highly of TOPPING's pure, detailed sound, its clean and refined design, and the convenience of TOPPING Home WEB — a clear vote of confidence in a fully integrated hardware-and-software audio ecosystem.

This was TOPPING's second trip to the United States this year, and it gave us another chance to meet North American audiophiles face to face. Strong sound and a wide range of features won over many overseas listeners, and we collected plenty of honest listening feedback from users on the ground.
TOPPING will keep its focus on Hi-Fi audio and bring better listening experiences to more music lovers at home and abroad.
On the Show Floor 1: DX5 II and DX1 II

DX5 II. A fully balanced all-in-one DAC and headphone amplifier. It uses two of ESS's latest ES9039Q2M DAC chips, decoding the left and right channels independently. Its new X-Hybrid amplifier architecture delivers a complete balanced, four-path amplifier in a remarkably compact chassis.
An optimized circuit topology cuts idle power and heat while improving efficiency. With an ultra-low noise floor of 1.1 µVrms and 7,600 mW × 2 of output, the DX5 II has the headroom to drive the vast majority of headphones. It also adds the new Aurora UI, PEQ adjustment, and headphone crossfeed.
DX1 II. An all-in-one DAC and headphone amplifier built for both music listening and gaming. Compared with the first generation, it switches to USB-C, adds a 4.4 mm balanced headphone output, and supports a 4-pole 3.5 mm headset with mic.
A single USB-C connection delivers a robust 1,000 mW × 2 @ 32 Ω, with a noise floor as low as 0.9 µVrms. The DX1 II also includes a dedicated optical (S/PDIF) input and output, a UAC switch, and RCA / 4.4 mm line outputs.
Both models support on-device control and EQ sharing through TOPPING Home WEB, letting listeners of all kinds shape a more convenient, personalized experience.
On the Show Floor 2: D900 DAC and A900 Amplifier
The D900 DAC and A900 headphone amplifier are TOPPING's most anticipated ultra-flagship products.

D900. Built on a discrete 1-bit DAC architecture with a 32-phase PSRM DAC module. Harmonic distortion falls below −140 dB and signal-to-noise ratio reaches 131 dB, putting performance on par with the finest DAC chips.
A 10-band high-precision PEQ lets you fine-tune frequency, gain, and bandwidth, with support for importing target and original curves and for precise curve compensation. The D900 is now also controllable through TOPPING Home WEB.
A900. Built on the Tanggula architecture. A new three-stage feedback circuit (patented) enables fully differential balanced amplification across the entire signal chain, with a 151 dB dynamic range and 0.00003% full-band THD (90 kHz bandwidth).
Three sets of stereo combo-jack balanced inputs accommodate a wide range of professional audio gear, while a complete set of headphone outputs ensures a clean match for virtually any headphone. A pure preamp output mode delivers the same high performance as the headphone amp mode. Fully balanced relay volume control adjusts level in precise 0.5 dB steps.
Many audiophiles came to the show specifically to hear this ultra-flagship stack, bringing their own headphones to test it on the spot. The combination drove headphones of different styles and impedances with equal ease. Its all-round performance earned high praise on the floor, with few weaknesses to be found.
On the Show Floor 3: DX9 Discrete

The DX9 Discrete is TOPPING's flagship fully balanced all-in-one DAC and headphone amplifier. A 16-phase PSRM 1-bit DAC module balances outstanding performance with proven stability. A CPLD paired with a precision clock optimizes the digital signal for deep jitter suppression and greater signal purity.
Its I/V conversion circuit, developed specifically for the PSRM module, combines low-distortion op-amps with ultra-low-noise discrete components to handle the module's output with precision. Fully balanced hybrid relay volume control eliminates the channel imbalance that can appear at low volumes on balanced outputs, making vocal imaging more precise.
Through TOPPING Home WEB, you can control the device, enjoy 10-band PEQ adjustment, and share EQ presets. Tune the sound to your own listening taste for a personalized desktop hi-fi experience.
Until next time
— see you in Dallas!
